AutoLEDTech.com's RGBW Flow Series LED 2 to 10 piece interior dash trim tube kit + footwell strip color changing lighting kit can change to any solid color, pure white, plus hundreds of moving, color-chasing, flow series patterns! This universal kit will fit any make or model vehicle that has a small gap between the interior panels that the tube tabs can be wedged between. The tubes are extremely thin (2.6mm) and can be cut/trimmed to your desired length as well. Extra strips can be purchased for $50.

RGBW Flow Series: Change the tubes to any solid color, pure white, plus hundreds of moving, chasing, flow series patterns.

Lumens: 18lm/LED 2430lm/Strip

Order Includes:

(2) 43" Flow Series Trim LED Tube Strips (Trimmable)
Additional Trim Strips (Optional)
(4) 12" Flexible Footwell Strip/Tubes (Optional)
(6) Extensions
(1) Voltage Regulator
(1) 4 Output Harness
(2) 2-1 Splitters
(1) Bluetooth Controller

Controller Options:

The Bluetooth controller is compatible with both Apple (iOS 8.0 or later) & Android(OS 4.4 or later) devices and features a complete static color wheel for seemingly endless solid color options, 200 sequential, color-chasing patterns, & brightness/speed control.

The BlueGhozt Lite 2.0 bluetooth controller is the newest controller to the flow series line up that allows you to create your own customizable addressable LED patterns and show modes, custom start-up/shutdown animations, custom turn signal patterns, NEW reverse light input trigger (create your own pattern/mode when you go into reverse), LED diagnostic, and board layouts. YOU CAN ALSO SYNC MULTIPLE BLUEGHOZT CONTROLLERS TOGETHER TO CONTROL ALL OF THEM AT THE SAME TIME! The controller has inputs/triggers for your vehicles startup/shutdown, turn signals, brake lights, and reverse lights. The controller uses uses the Blueghozt app on your iOS and Android device.

Youtube Videos:

Instagram videos:

View this post on Instagram

A post shared by Lighting Trendz (@lightingtrendz)

View this post on Instagram

A post shared by Lighting Trendz (@lightingtrendz)

View this post on Instagram

A post shared by Lighting Trendz (@lightingtrendz)

Is this compatible with my vehicle?

As long as your interior trim panels have gaps where the lighting tubing can be inserted, your interior is fully compatible! Scouting your interior ahead of time is recommended - common lighting placements include between gaps along the front dash, center console, and door seams.

How is this installed?

This kit is installed by inserting sections of the lighting tubing in between the gaps of your vehicle’s interior trim. No adhesive is needed, the lighting can be taken out at any time (view our general installation guide attached below for reference). The installation procedures listed on the guide can be adapted to your own interior and personal desires.

How is this powered?

You will need to connect the + wire to a 12v power source (splice into wire, tap into fuse, relay, battery, etc). The - wire needs to be grounded(Frame bolt, bare metal, - battery terminal, etc)

What color is the tubing during the day?

Please note - the lighting is not intended to be used during the day, or in any bright environments. When off, the sections of lighting tubing appear completely clear and transparent, allowing them to blend in with the rest of the interior.

Can the lighting be dimmed?

Yes, in addition to color and lighting modes, brightness can also be adjusted on the mobile application.

Interior Trim Tube Ambient Light Kit Installation Guide:

Step 1: power your wire harness using any 12v positive and ground connection or use the included cigarette lighting power adapter (red to red and black to black)

Step 2: Install Lights in your desired area by pushing them securely into any gap or split in your interior. Use a squeegee or credit card to help fit the lights in tight areas. It is important to note that lights only bend one way so be sure to test keep this is mind when installing.

Step 3: Power each strip direct to the wiring harness using the included extension wire and be sure to hide wires as best you can.

Step 4: Open the app to control your lights!

5% OFF YOUR FIRST PURCHASE!