2019-2023 Chevrolet Camaro RGBW LED DRL Board Installation Guide
TAPPING INTO FACTORY TURN SIGNALS: If you want your RGBW DRLs to also act as turn signals, you will tap the Yellow wire off of the drivers side LED driver box to the blue wire on the vehicles drivers side headlight harness. The passenger side LED driver box yellow wire taps into the green wire on the vehicles passenger side headlight harness.
Our kits come with demon eyes to use for the fog lights, as it does not require you to cut open the fog lights. You only need to remove the metal heatsink, remove the factory LED, line up and secure the demon eye in its place (remove bracket and cut off metal tab so demon eye fits properly), trim a small amount of the plastic lip off the fog light assembly to run the wires out, then reinstall the heatsink. Photo below shows how the demon eye secures into the fog light: