Replaces Part #: JL3Z13008AH, JL3Z13008G, JL3Z13008AG, JL3Z13008A, JL3Z13008AK, JL3Z13008H, JL3Z13008AJ, JL3Z13008B, JL3Z13008AH, JL3Z13008G, JL3Z13008AG, JL3Z13008A, JL3Z13008AK, JL3Z13008H, JL3Z13008AJ, JL3Z13008B, JL3413EO15AE, Jl3413e015al, FO2502373, FO2503373, FO2502372, FO2503372
MORE LIGHT OUTPUT: The original F150 XB heads used two projectors on top for the low beam, and two on the bottom as a dedicated high beam. The new setup utilizes all four projectors for the low beam and has a dual Bi-LED setup for the high beam. The results? 200% more light output and a better distribution of light for improved visibility in the distance and off to the sides of the road. Asked and answered!
START-UP SEQUENCE: And if the optical upgrades weren't enough, the badass start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor!
DOT APPROVED: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical adjusters.
PLUG-N-PLAY: Wiring is easy too! The Morimoto F150 LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty.
WELL-BUILT: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These use the same external housing / lens from the gen one version, and those have held up like OEM after a few years on the market.