AutoLEDTech.com's 6-Piece RGB LED interior dash trim tube color changing ambient car lighting kit is easy to install and extremely bright! This universal kit will fit any make or model vehicle. The Interior Trim Kit is plug & play with your accessory power outlet or it can be hardwired to your preferred power source. The 26.3ft of trimmable tubing can be cut/divided up to fit all of your trim panels properly. To install, you wedge the thin tabs on the back of the tubing in between your trim panels, then cut the tubing to length. You then connect one of the light sources to one or both ends of the tubing to light it up. The kit can be controlled by a bluetooth app and a handheld remote.
RGB: Change the tubes to any solid color, white, plus a few flashing/fading patterns
Click here for the installation guide
(6) High Power LED Outputs
(1) Bluetooth Controller for control right from your smartphone
- (1) Handheld Controller
26.3 Feet of Trim-able Clear Light Tube
- Trim Panel Wedge Tool (To push tubing in between panels)
- End Caps for Tubing (To stop light from shining at the opposite end)
- PVC Tape
- Installation Tools
16+ million colors - Fully RGB (controlled via Bluetooth app or Handheld Remote)
Fits any vehicle
Two powering methods included - 12V hardwire & 12V ac adapter plug
Tons of RGB lighting patterns (solid colors, fade, strobe, etc.)
All lighting sources connected to a single powering console
Is this compatible with my vehicle?
As long as your interior trim panels have gaps where the lighting tubing can be inserted, your interior is fully compatible! Scouting your interior ahead of time is recommended - common lighting placements include between gaps along the front dash, center console, and door seams. This lighting bundle can be powered on all vehicles; two powering options are included, 12V AC adapter plug and 12V hardwire.
How is this installed?
This kit is installed by inserting sections of the lighting tubing in between the gaps of your vehicle’s interior trim. No adhesive is needed, the lighting can be taken out at any time (view our general installation guide attached below for reference). The installation procedures listed on the guide can be adapted to your own interior and personal desires.
How is this powered?
Two powering methods are included, 12V hardwire and 12V ac adapter plug. Only one method will be used, the customer can decide which method works best for their particular installation. The 12V hardwire option offers customizability and potential for more concealment, while the 12Vac adapter plug option offers a simple plug & play route.
What color is the tubing during the day?
Please note - the lighting is not intended to be used during the day, or in any bright environments. When off, the sections of lighting tubing appear completely clear and transparent, allowing them to blend in with the rest of the interior. In addition, note that the lighting can be switched on or off at any time via the mobile app.
What colors can these be set to?
You can chose from over 16 million colors on the mobile app, and set the whole interior to multiple different lighting modes. Lighting modes include fade, strobe, color cycle, and custom color intervals.
Can the lighting be dimmed?
Yes, in addition to color and lighting modes, brightness can also be adjusted on the mobile application.