2014-2021 Jeep Grand Cherokee Trackhawk Fiber Steering Wheel Here
2014-2021 Jeep Grand Cherokee & Trackhawk Carbon Fiber Steering Wheel Installation Videos
LED module wiring starts at 12:15. The thin red & thin black wire on the side of the wheel are LED +/-, splice into red and black wire on main steering wheel harness (see video above)
RGB SRT Airbag Cover Install Video: https://www.instagram.com/reel/C_0ibFzP37T/
If you do not want to have the LED constantly powered, tap into the power wire from the videos below (where they tap power for + on the LED module)
App is Symphony Light or Lotus Lamp X
Heat Wiring Explained:
On your stock steering wheel wiring:
On your stock steering wheel wiring, the 4 wires with the white connector is the heat plug. It will have a Gray, purple, yellow, and black wire on it.
Black: connect to thick black wire from new wheel (Ground)
Yellow: connect to thick red wire from new wheel (Signal Wire)
Purple: connect to thin red from new wheel (Heat return/neg)
Gray: connect to thin red from new wheel (Heat feed)
OR
New wires|Original wires
Thick Black|Blue
Thick red|Blue
Thin red|Black
Thin red|Brown
On your new custom wheel:
Thin red: temp sensor (Heat feed/return)
Thin red: temp sensor (Heat feed/return)
Red: +
Black: -
