Color-Changing RGB Interior Dash Trim Ambient Lighting Kit
Couldn't load pickup availability
Product Description
Plug & Play 6-Piece RGB LED interior dash trim ambient car lighting kit is easy to install and extremely bright! This universal kit will fit any make or model vehicle. The Interior Trim Kit is plug & play with your accessory power outlet or it can be hardwired to your preferred power source. The 26.3ft of trimmable tubing can be cut/divided up to fit all of your trim panels properly. To install, you wedge the thin tabs on the back of the tubing in between your trim panels with the included trim tool, then cut the tubing to length. You then connect one of the light sources to one or both ends of the tubing to light it up. The kit can be controlled by a bluetooth app and a handheld remote.
- RGB: Change the tubes to any solid color, white, plus a few flashing/fading patterns
Click here for the installation guide
Order Includes:
-
(6) High Power LED Outputs
- (1) Bluetooth Controller for control right from your smartphone
- (1) Handheld Controller
- 26.3 Feet of Trim-able Clear Light Tube
- Trim Panel Wedge Tool (To push tubing in between panels)
- End Caps for Tubing (To stop light from shining at the opposite end)
- PVC Tape
- Installation Tools
Features:
- 16+ million colors - Fully RGB (controlled via Bluetooth app or Handheld Remote)
- Fits any vehicle
- Two powering methods included - 12V hardwire & 12V ac adapter plug
- Tons of RGB lighting patterns (solid colors, fade, strobe, etc.)
- All lighting sources connected to a single powering console
Is this compatible with my vehicle?
As long as your interior trim panels have gaps where the lighting tubing can be inserted, your interior is fully compatible! Scouting your interior ahead of time is recommended - common lighting placements include between gaps along the front dash, center console, and door seams. This lighting bundle can be powered on all vehicles; two powering options are included, 12V AC adapter plug and 12V hardwire.
How is this installed?
This kit is installed by inserting sections of the lighting tubing in between the gaps of your vehicle’s interior trim. No adhesive is needed, the lighting can be taken out at any time (view our general installation guide attached below for reference). The installation procedures listed on the guide can be adapted to your own interior and personal desires.
How is this powered?
Two powering methods are included, 12V hardwire and 12V ac adapter plug. Only one method will be used, the customer can decide which method works best for their particular installation. The 12V hardwire option offers customizability and potential for more concealment, while the 12Vac adapter plug option offers a simple plug & play route.
What color is the tubing during the day?
Please note - the lighting is not intended to be used during the day, or in any bright environments. When off, the sections of lighting tubing appear completely clear and transparent, allowing them to blend in with the rest of the interior. In addition, note that the lighting can be switched on or off at any time via the mobile app.
What colors can these be set to?
You can chose from over 16 million colors on the mobile app, and set the whole interior to multiple different lighting modes. Lighting modes include fade, strobe, color cycle, and custom color intervals.
Can the lighting be dimmed?
Yes, in addition to color and lighting modes, brightness can also be adjusted on the mobile application.
General FAQs
General FAQs
Why choose AutoLEDTech?
AutoLEDTech was one of the first companies in the US to offer Flow Series LEDs in 2016. Over the years, we have added more than 600 products to our lineup from only the highest quality manufacturers, with over 12,000 customers served and counting!
Do your products have a warranty?
All of our products include an industry standard 1 year warranty, though some products from manufacturers like Diode Dynamics and Morimoto include a 5-8 year warranty.
What is the difference between Flow Series and RGBW?
Flow Series LEDs can change to any solid color, pure white, plus hundreds of moving, multicolor, flowing patterns. Sequential turn signal/DRL startup functions are available with most of the bluetooth controller options.
RGBW LEDs can change to any solid color, pure white, plus several flashing/fading patterns. Flashing turn signals come standard with most RGBW products & controllers.
How can I contact you with questions about products or my order?
The quickest way to get in touch with us is to use the "Expert Help" tab where we will reply within 24 hours about product questions, order inquiries, warranty requests, or anything else!
Where do your products ship from?
All of our products ship from the USA. Most products ship from our warehouse in Panama City Beach, FL though some select products ship directly from manufacturers or warehouses in Georgia, New Jersey, or Arizona in order to keep your shipping costs and delivery times LOW!
How long does shipping take?
Most in stock items ship within 1-2 business days. Transit times tend to be an average of 3-5 days.
Lead times for custom items, such as headlights, steering wheels, etc are as follows:
Grill Light Bars: 3-5 business days
Custom Steering Wheels: 5-8 weeks
Custom Headlights: 8-10 weeks (Can be longer or shorter depending on model)
How do I track my order?
As soon as your order ships, you will receive an email with the related tracking number and link. You can also login to your customer account or SHOP app account to check order status (Confirmed, Shipped, In Transit, Delivered).
What is your return/cancellation policy?
We accept returns on most products within 30 days. See our detailed return/cancelation policy on our FAQ page.
Halo & DRL Board FAQs
Halo & DRL Board FAQs
What is a halo or DRL board?
A halo is a circular or ring-shaped LED light, typically used for DRLs or as an accent light. Halos can also be made in other shapes to fit a specific headlight designs. DRL boards are LED circuit boards designed in the same shape as the headlights factory DRL board, but with our color-changing LEDs. this design reduces the modification required when installing color-changing LEDs.
Is this a complete headlight assembly?
No, this is ONLY the halo and/or DRL boards kit that you will install inside of your existing headlights by opening them up and modifying them. If the title and description says halo or DRL kit, it is not a complete headlight assembly. If the title and description says prebuilt headlights or headlight assemblies, then it is the entire light.
What is the difference between Flow Series and RGBW?
Flow Series RGBW LEDs can change to any solid color, pure white, plus hundreds of moving, multicolor, flowing patterns. Sequential turn signal/DRL startup functions are available with most of the bluetooth controller options.
RGBW LEDs can change to any solid color, pure white, plus several flashing/fading patterns. Flashing turn signals come standard with most RGBW products & controllers.
How do I install my halo or DRL kit?
Here is a general installation guide for halos & DRL board kits. For installation guides & videos for your specific vehicle, you can typically find many videos or forum posts for your model by typing "How to install led halo (or) DRL boards for *vehicle year range*make*model*"
How do I wire my halo or DRL kit?
Check out the "Guides" tab on our website for wiring diagrams and instructions. An instruction pamphlet will be included with most orders. Click here for Flow Series wiring. Click here for RGBW wiring. Click here for Blueghozt wiring.
What are halo diffusers?
Halo diffusers are a semi-transparent cover that goes over the halos so you do not see the individual LED dots. They create a smooth, uniform light output for your halos. these are available in select sizes in either a frosted white finish or smoked finish.
What are demon eyes?
Demon eyes are a small LED light that give the headlight projector lens (where the headlight bulb typically shines out) a glowing effect that can change to any solid color. These are typically controlled separately from your halos/DRLs and DO NOT replace your actual headlight bulbs!
What are projector halos?
Projector halos are LED halo rings (typically circular) that go around the projector in your headlights. The projector is the area/piece where your headlight bulb shines out of.
Controller Options
Controller Options
Flow Series & RGBW Bluetooth 2.0 (PRO) Controller
New and improved Flow Series PRO 5V Bluetooth App + OPTIONAL Handheld remote features a redesigned app with brand new features including controller grouping, renaming, favorites, selective connectivity (no unrelated bluetooth devices show up), and a handheld remote so you can quickly control the lights without opening the app! It also has input wires for turn signals, DRL, and brake so your halos/DRLs can mirror those functions. This controller is compatible with all 5V flow series halos, DRLs, and strips that have 3-pin JST connectors.
- Grouping Function: Seamlessly pair multiple controllers together to create distinct lighting zones, ensuring synchronized performance across all connected lights.
- Personalization: Easily save your favorite colors and patterns, tailoring your vehicle's aesthetics to suit your mood or occasion.
- OEM+ Function: Turn signal, DRL, and brake inputs so your halos can mirror OEM functions.
- Renaming Capability: Customize the name of each controller for simple identification, enhancing ease of use within the app.
- Selective Connectivity: The dedicated app is designed to connect exclusively with PRO controllers, avoiding clutter by not displaying other Bluetooth devices in the vicinity.
- Extended Features: Explore a variety of additional functions designed to maximize the utility and enjoyment of your automotive lighting setup.
Compatible with all 5V Flow Series halos, DRLs, and strips with 3-pin JST connectors. The controller has (4) 3-pin barrel connectors, inline fuse, and hooped power + ground connectors. It also has turn signal, DRL, and brake input wires.
Flow Series BlueGhozt Advanced Controller
The BlueGhozt Lite 2.0 bluetooth addressable Flow Series LED controller allows you to create your own customizable addressable LED patterns and show modes, custom start-up/shutdown animations, custom turn signal patterns, NEW reverse light input trigger (create your own pattern/mode when you go into reverse), LED diagnostic, and board layouts. The controller has inputs/triggers for your vehicles startup/shutdown, turn signals, brake lights, and reverse lights. You can also sync multiple BlueGhozt controllers together in the app to control everything together at the same time. The controller uses uses the Blueghozt app on your iOS and Android device and is compatible with ws2811, ws2812b, SK6812, and similar Flow Series RGB/RGBW addressable LEDs (Neopixel/Neoprism). The Blueghozt controller supports both RGB Flow Series and RGBW Flow Series LED types and is compatible with both 5V or 12V versions of addressable LEDs. It provides similar animation capabilities as the original Ghozt module.
In order to signal the lights to perform the startup/shutdown/turn signal features, you will need to find the vehicles DRL and turn signal wires and tap/splice into them. ETC.
Features:
- Four 12V inputs, for left turn, right turn, park, and brake
- Controls two chains of addressable LEDs up to 350 each! (260 for RGBW Flow)
- Fully configurable through Bluetooth with our iOS/Android app!
- New features delivered over the air through our app updates!
- Sequential turn signals
- F1-style braking
- Parking/running lights
- Reverse lights
- Show modes triggered via Bluetooth
- One module controls two turn signals
- Unlimited fully customize-able show modes can be saved with the app
- Adjustable turn signal timing to car’s flasher unit
- Very low power drain while in operation, sleep mode when idle
- Small form factor
- Includes a protective plastic housing
Shipping & Delivery
Shipping & Delivery
Where do your products ship from?
All of our products ship from the USA. Most products ship from our warehouse in Panama City Beach, FL though some select products ship directly from manufacturers or warehouses in Georgia, New Jersey, or Arizona in order to keep your shipping costs and delivery times LOW!
How long does shipping take?
Most in stock items ship within 1-2 business days. Transit times tend to be an average of 3-5 days.
Lead times for custom items, such as headlights, steering wheels, etc are as follows:
Grill Light Bars: 3-5 business days
Custom Steering Wheels: 5-8 weeks
Custom Headlights: 8-10 weeks (Can be longer or shorter depending on model)
How do I track my order?
As soon as your order ships, you will receive an email with the related tracking number and link. You can also login to your customer account or SHOP app account to check order status (Confirmed, Shipped, In Transit, Delivered).
Package Includes
Package Includes
Vehicle Compatibility
Vehicle Compatibility
Why Choose AutoLEDTech?

Custom Upgrades
Premium Quality
Advanced Lighting
Easy Install
Great Support
Flexible Options
Let customers speak for us
Driving Excellence:
Our Impact in Numbers
15,000+
700+
1,000+
9+
Frequently Asked Questions
