AutoLEDTech.com 's 6-piece symmetrical color-changing RGBW or color-chasing Flow Series RGB LED underbody underglow lowglow lighting kits feature 6 LED strips that are flexible and cuttable with a 3M adhesive backing to easily mount the strips wherever you please! We also include zipties for mounting the strips or tucking away wires. This kit includes 2 36" (3 foot) strips for the front, 2 32" (2.67 foot) strips for the rear, and 2 longer 96" (8 foot) strips for the sides. With the flow series kit, this means you'll have a symmetrically flowing patterns flowing from the middle of the vehicle! The wire extensions feature waterproof 5-pin barrel connectors and controller to ensure a water-tight seal.
Trimming is as easy as cutting on the copper segment on the strip and replacing the strip cap to ensure a waterproof seal!
THESE ARE NOT THE SAME AS CHEAP AMAZON KIT. THIS KIT IS COVERED BY A 1 YEAR WARRANTY IF SELF INSTALLED OR A LIFETIME WARRANTY IF INSTALLED BY AN AUTHORIZED DEALER.
RGBW LED Underbody Lighting Kit: Featuring the ability to change to any solid color, PURE white, plus a few flashing/fading patterns.
Color-Chasing LED Underbody Lighting Kit: Featuring the ability to change to any solid color, white, plus hundreds of flowing, multicolor, moving patterns.
CLICK HERE TO ADD ON OUR UNDERBODY LED STRIP HIDING KIT IF YOU ARE WORRIED ABOUT SEEING THE STRIPS/LEDS ON YOUR UNDERGLOW KIT!
CLICK HERE FOR OUR UNDERBODY INSTALLATION GUIDE
Order Includes:
- (2) 36" Flexible, trim-able, waterproof LED Underbody Strips (For the front)
- (2) 96" Flexible, trim-able, waterproof LED Underbody Strips (For the sides)
- (2) 32" Flexible, trim-able, waterproof LED Underbody Strips (For the front)
- (6) Waterproof Extension Wires - (2) 5ft, (2) 10ft, (2) 23ft
- Selected Controller (Required)
Add Your Remote:
*All kits require a controller to function, so please select one of the remotes available: our Bluetooth Remote controls your setup through an app on your mobile device, our Handheld remote is our wireless handheld remote.
The BlueGhozt Bluetooth Controller only works with Color-
Chasing/Flow Series lights and allows you to control your lights with the BlueGhozt App that can create customized patterns and save your favorite patterns & colors as well as have the strips turn on/off with your DRLs and do custom start up and shut down sequences, turn signal animations, etc. This controller will require you to splice in wires to your vehicles DRL wire and turn signal wires in order to signal the custom sequences. We do not provide wiring instructions for your specific vehicle. You will need to research which wire or fuses to tap into. A Quick Start Guide can be found here:
https://ghoztlighting.com/getting-started-blueghozt/
