AutoLEDTech's plug & play LED tail light assemblies designed for your 2005-2010 Ferrari F430 (Berlinetta, Spider, Scuderia, 16M, all models) and Ferrari Enzo are available in a factory red or smoked lens and will instantly refresh the rear end of your Ferrari! These tail lights are 100% plug and play and use all factory connectors. These are the best (and one of the only) LED tail light solutions for your 2005-2010 Ferrari F430 or Enzo! Featuring sleek, uniform circular running/brake lights, EXTREMELY bright reverse lights on all 4 tail lights (the brightest we've made to date) and turn signals on all 4 lights as well. The owner of the largest Morimoto distribution center in the US has these installed on his personal Ferrari F430, so expect nothing but the best! The LED Tail Lights mount to factory bolt locations and require zero modification to install. Install should take less than an hour and is very simple, just watch the video below! These will work for both US-Spec Ferrari F430s and Euro-Spec Ferrari F430s however, the Euro-Specs require an adapter harness.
SHIPPING ETA IS 6/16, ORDER NOW TO SECURE YOUR SET!
The 2005-2010 Ferrari F430 & Enzo LED Tail Lights are designed and confirmed to fit the following models:
- 2003-2005 Ferrari Enzo (All models)
- 2005 Ferrari F430 (Berlinetta, Spider, Scuderia, 16M, all models)
- 2006 Ferrari F430 (Berlinetta, Spider, Scuderia, 16M, all models)
- 2007 Ferrari F430 (Berlinetta, Spider, Scuderia, 16M, all models)
- 2008 Ferrari F430 (Berlinetta, Spider, Scuderia, 16M, all models)
- 2009 Ferrari F430 (Berlinetta, Spider, Scuderia, 16M, all models)
- 2010 Ferrari F430 (Berlinetta, Spider, Scuderia, 16M, all models)
Replaces Ferrari Part # 193181, 185669, 185671, 185668, 185670
2005-2010 Ferrari F430 LED Tail Lights Assemblies Demo and Installation Video:
Click here for the 2005-2010 Ferrari F430 & Enzo Red or Smoked LED Tail Light Assemblies Installation Guide
- TAIL LIGHTS: 4x (One Set) 2005-2010 Ferrari F430 XB LED Tail Lights
- WIRING: Plug and Play Splitter Harness + Magnetic-Mount Resistors
- MOUNTING: 16x Heavy-Duty Mounting Thumb Nuts
- WARRANTY: 5 YEARS
- INPUT: Ferrari Multi-Pin OEM
- MATERIAL: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
- LIGHT SOURCE: SSC LED
- REVERSE LIGHT: White
- BRAKE LIGHT: Red (Bright)
- PARKING LIGHT: Red (Dim)
- TURN SIGNAL: Amber
- COMPLIANCE: DOT, SAE, FMVSS108 Standards
FERRARI: There is nothing that looks better. Nothing that sounds better. Nothing with more character... than a V8 Ferrari. Everything about these cars is the pinnacle of perfection for analog-enthusiasts, and we wouldn't change a thing. Well, except for the stock taillights…which are based on incandescent bulbs from the 80s and have two cracked mounting-points so they are rattling their way off the back of your car. So long as the rear-end of your Ferrari is the only thing that everybody sees as you fly by, it might as well look good as good as it sounds, right?
COMPATIBLE: these are a direct bolt-on fitment for all Ferrari F430s from 2005-2010 including the Berlinetta, Spyder, 16M, and Scuderias. They use all of the stock mounting points, and should not take more than an hour or two to install all four tail lights.
PLUG N PLAY: The Ferrari F430 LED tail lights from Morimoto are designed to work without any modifications. These LED tail lights will plug into the factory connectors for the stock lights on all US-spec cars. An optional adapter harness for Euro-spec vehicles is available as well (SKU: LF356H-EU) Each set includes signal splitters too, which makes the pair of lights on each side of the car to work in unison (rather than one acting as the turn signal, the other as the brake). If you prefer to leave the setup as-is from the factory, you don't need to use the splitter.
STYLE: Inspired by the design of the tail lights on the Ferrari 488, these are the perfect solution to modernize the rear end of your 430 without compromising the work of Pininfarina. The red-lens model looks especially natural on the car and could truly pass for original-equipment, while the fully smoked version offers a more aggressive and even more modern look.
FUNCTIONS: The optical light pipe that highlights the outside perimeter of each light acts as a low intensity parking light, and high intensity brake light (red). The middle section acts as the turn signal and hazard light (amber). The center of each light is a high-intensity reverse light (white).
WELL-BUILT: Whereas the stock tail lights use 3 plastic mounting points, these make use of all four available attachment points with reinforced ABS studs, making them much more resilient against cracking compared to the OE units. The durable polycarbonate lens has been UV treated, and will resist the test of time, keeping the housings looking new for many years to come. All wiring and connections are OE grade. The price is justified, and as the saying goes: you pay for what you get. These tail lights are built to exceed OEM Ferrari quality and should easily last the life of your F430.